Products Description
Product Features
■ Non-contact measurement of liquid flow
■ Small size and easy to carry
■ Built-in printer and SD memory for immediate or timed printing of set measured values
Product Specification
PUF200 Series Ultrasonic Flowmeter | ||||
Model | PUF200 | |||
Principle | Ultrasonic time difference principle | |||
Precision | ±1% | |||
Display | 4x8 Chinese or 4x16 Western dot matrix backlit LCD display with support for Chinese, English, Italian and French | |||
Signal output | 1 channel 4~20mA current output, impedance 0~1K, accuracy 0.1% (optional) 1 channel OCT pulse output (pulse width 6-1000ms, default 200ms) 1 relay output | |||
Signal input | 3 channels 4 ~ 20mA current input, accuracy 0.1%, can collect temperature, pressure, liquid level and other signals Can be connected to a three-wire PT100 platinum resistor for thermal measurement | |||
Data interface | Isolating the RS232 serial interface, the flowmeter can be upgraded through a PC computer, and protocols such as Modbus are supported. | |||
Data record | Thermal printer, external SD card, capacity up to 2G | |||
Pipe | Steel, stainless steel, cast iron, copper, PVC, aluminum , fiberglass, and other dense pipes, allowing lining | |||
Pipe inner diameter | 15-6000mm | |||
Straight pipe | The sensor installation point is best to meet: upstream 10D, downstream 5D, from the pump outlet 30D (D is the pipe diameter) | |||
Medium | Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils, etc. | |||
Fluid temperature | -30～+160℃ | |||
Turbidity | 1000pmm bubble content is small | |||
Flow rate | 0～±10m/s | |||
Working environment | Host: -20 ~ +60 ° C; flow sensor: -30 ~ +160 ° C Host: 85% RH; sensor protection level: IP67 | |||
Power supply | 3-cell rechargeable Ni-MH battery with 1.2V capacity of 2000mAH, which can work continuously for more than 12 hours every time. | |||
Power consumption | 1W | |||
Size and accessories | ||||
|
| |||
Bracket sensor | 615×420×130mm |
| 470×350×130mm | |
Product Dimensions
Product Features
■ Non-contact measurement of liquid flow
■ Small size and easy to carry
■ Built-in printer and SD memory for immediate or timed printing of set measured values
Product Dimensions
Product Specification
PUF200 Series Ultrasonic Flowmeter | ||||
Model | PUF200 | |||
Principle | Ultrasonic time difference principle | |||
Precision | ±1% | |||
Display | 4x8 Chinese or 4x16 Western dot matrix backlit LCD display with support for Chinese, English, Italian and French | |||
Signal output | 1 channel 4~20mA current output, impedance 0~1K, accuracy 0.1% (optional) 1 channel OCT pulse output (pulse width 6-1000ms, default 200ms) 1 relay output | |||
Signal input | 3 channels 4 ~ 20mA current input, accuracy 0.1%, can collect temperature, pressure, liquid level and other signals Can be connected to a three-wire PT100 platinum resistor for thermal measurement | |||
Data interface | Isolating the RS232 serial interface, the flowmeter can be upgraded through a PC computer, and protocols such as Modbus are supported. | |||
Data record | Thermal printer, external SD card, capacity up to 2G | |||
Pipe | Steel, stainless steel, cast iron, copper, PVC, aluminum , fiberglass, and other dense pipes, allowing lining | |||
Pipe inner diameter | 15-6000mm | |||
Straight pipe | The sensor installation point is best to meet: upstream 10D, downstream 5D, from the pump outlet 30D (D is the pipe diameter) | |||
Medium | Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils, etc. | |||
Fluid temperature | -30～+160℃ | |||
Turbidity | 1000pmm bubble content is small | |||
Flow rate | 0～±10m/s | |||
Working environment | Host: -20 ~ +60 ° C; flow sensor: -30 ~ +160 ° C Host: 85% RH; sensor protection level: IP67 | |||
Power supply | 3-cell rechargeable Ni-MH battery with 1.2V capacity of 2000mAH, which can work continuously for more than 12 hours every time. | |||
Power consumption | 1W | |||
Size and accessories | ||||
|
| |||
Bracket sensor | 615×420×130mm |
| 470×350×130mm | |
