Ultrasonic flow meter-Atech Sensor Co., Ltd.

Ultrasonic Flowmeter for water simple installation no need to cut pipe

●The measuring rate can be greater than 300 times per second, which is much higher than other brands in terms of tolerance to bubbles in the measuring tube diameter. It can tolerate continuous bubbles for 5 seconds.

●The signal strength is increased, with greater penetration into various scales, rust inside the pipe, and the inner lining of the pipe.

●The sensor adopts our unique manufacturing process and pairing technology, and the zero point range can be controlled within 0.03m/s. The static time difference between each pair of sensors is less than 2 nanoseconds, which effectively ensures the authenticity of the measured time difference.

Portable Ultrasonic Flow Meter

●Equipped with a magnetic mounting rail that can be attached to the outside of the pipe wall. Easy to install, saving installation time and cost.

●The measuring range is large, and one set of sensors can be used to measure pipe diameters within all measuring ranges.

●Added energy meter/cold (heat) meter function, which can be expanded into a portable energy meter/cold (heat) meter.

Wall-mounted ultrasonic flow meter

●High reliability, high performance

●It can effectively overcome the ultrasonic signal attenuation caused by the pipe wall and the ultrasonic signal scattering caused by the rough inner surface of the pipe, thereby reducing the energy consumption of the ultrasonic signal.

●The accuracy of flow measurement is improved, which is particularly suitable for flow measurement in piping.

●Unique pressure removal does not affect normal production and can be replaced and inspected online at any time.