Flow Meters
-
![Electromagnetic Heat Energy Meter for Heating and Cooling]()
Electromagnetic Heat Energy Meter for Heating and Coolingread more●The electromagnetic heat meter uses a 16-bit microcontroller for data calculation and a platinum thermal resistor for temperature measurement. Electromagnetic flowmeters measure flow. It has high measurement accuracy, stable and reliable operation, and excellent performance.
●The measurement accuracy is not affected by changes in parameters such as viscosity, density, pressure, conductivity, and fluid distribution of the heat-carrying fluid.
●There are no resistance parts in the measuring tube, no pressure loss, and it is not affected by poor water quality.
●Wide measuring flow range. The flow rate can be set arbitrarily within the range of 1m/s-10m/s.
-
![Large Diameter Pipe – Electromagnetic Flow Meter for Sewage/Wastewater]()
Large Diameter Pipe – Electromagnetic Flow Meter for Sewage/Wastewaterread more●Non-invasive, no moving parts flow sensing technology
●Accuracy 0.5% of actual flow
●Calibration pre-programmed to user’s specific applications
●Measures liquid flow in 2 to 36 inch
-
![Electromagnetic Partially Filled Pipe Flow Meter]()
Electromagnetic Partially Filled Pipe Flow Meterread more●It can be used to measure the flow of open non-full pipes (round pipes, rectangular pipes or other special-shaped pipes);
●It can be used for continuous measurement of municipal rainwater, wastewater, sewage discharge and irrigation water pipes, etc.;
●Can realize forward and reverse bidirectional flow measurement;
●The sensor can work reliably for a long time under harsh site and sewage water quality;
-
![4-20mA modbus chilled water flow meter price list electromagnetic flowmeter insertion magnetic flow meters for water]()
4-20mA modbus chilled water flow meter price list electromagnetic flowmeter insertion magnetic flow meters for waterread more●For applications where the Insertion magnetic flow meter will be installed in pressurized pipes, use the optional Hot Tap Installation Hardware Kit.
It includes a branch outlet, close nipple and 1-1/4″ full port ball valve.
●The Insertion Magmeter installs in the pipe through a full port ball valve so the sensor can be easily retracted without having to shut down flow or drain the system. The insertion depth is adjustable according to the pipe diameter. An insertion depth gage is supplied with each flowmeter.
●The sensor structure of the electromagnetic flowmeter is relatively simple, and it is one of the flowmeters with the lowest energy consumption in the flowmeters. There are no moving parts in the measuring tube and no throttling part that blocks the flow of fluid and does not cause any additional pressure loss when the fluid passes through the flow meter.
-
![Factory supply Seperate type Electromagnetic flow meter DN6-DN2200 Water and Fluid Medium]()
Factory supply Seperate type Electromagnetic flow meter DN6-DN2200 Water and Fluid Mediumread more●High accuracy
●Low cost
●Little to no pressure loss
●Readings that are unaffected by changes in density or viscosity
-
![Electromagnetic Flow Meter Measuring Range DN6~ DN3000]()
Electromagnetic Flow Meter Measuring Range DN6~ DN3000read more●Measurement result will not be affected by change of density, viscosity, temperature, pressure and conductive rate
●Product with good anti-corrosion and abrasion resistance performance.
●Full digital process, strong anti-interference performance, operating reliable with high accuracy and wide range of flow rate
●Super low voltage EMI switch power supply, ensure fast response for voltage changes and good resistance on EMI
