Products Description
It is a plastic rainfall gauge on a weather station. Compared with the standard stainless steel tipping bucket rain gauge, it is a more commercial rain gauge with a low price. It adopts the working principle of the standard tipping bucket rain gauge, but due to material problems, accuracy and service life are slightly lower than stainless steel rain gauge. If you are a beginner in the rain gauge, or if you have a limited budget and want to buy a cheap rain gauge, then our abs tipping bucket rain gauge will be your best choice.
Model: Aetch 2-2
MOQ: 1 PCS
Delivery date: within 24 hours
The tipping bucket of our rain gauge is a three-dimensional streamlined design and is designed with a drooping curved diversion tip. Its appearance is beautiful and smooth, the water tipping performance is better, and it is easy to clean and maintain.
Product Features
1. Easy use
Small size, easy installation, good stability. There is a level adjustment bubble inside the chassis, which can assist the bottom comer to adjust the equipment to the level.
2. High accuracy
Good linearity, long transmission distance, strong anti-interference ability. The rain-bearing mouth is made of ABS engineering plastic injection molding, with high smoothness and small errors caused by stagnant water.
3. Good stability
The tipping bucket component support system is well-manufactured and the frictional moment is small, so the tipping bucket components can be flipped sensitively and work reliably.
4. Long using life
The shell of the plastic rain gauge is made of ABS engineering plastics, no rust, good appearance quality. Mesh holes are designed at the funnel to prevent leaves and other debris from blocking the rain flow down.
5. Widely Application
Our ABS tipping bucket rain gauge can measure precipitation, precipitation intensity, precipitation time, and other parameters for relevant departments such as imeteorological stations, hydrological stations, agriculture and forestry, national defense, and field observation stations. It can provide original data for flood control, water supply dispatching, and water regime management of power stations and reservoirs.
Product Specification
ABS rain gauge parameters
Inner diameter: Φ200mm/8 inch
Resolution: 0.2mm
The acute angle of cutting edge: 40°～45°
Operating Temperature: 0～50℃
Working humidity: <95%(40℃)
Measuring range: 0mm～4mm/min
Accuracy: ≤±7%
Power supply: 10V～30V DC
Output signal: RS485/Pulse
Mounting holes: Three mountings
Product Dimensions
Product Features
1. Easy use
Small size, easy installation, good stability. There is a level adjustment bubble inside the chassis, which can assist the bottom comer to adjust the equipment to the level.
2. High accuracy
Good linearity, long transmission distance, strong anti-interference ability. The rain-bearing mouth is made of ABS engineering plastic injection molding, with high smoothness and small errors caused by stagnant water.
3. Good stability
The tipping bucket component support system is well-manufactured and the frictional moment is small, so the tipping bucket components can be flipped sensitively and work reliably.
4. Long using life
The shell of the plastic rain gauge is made of ABS engineering plastics, no rust, good appearance quality. Mesh holes are designed at the funnel to prevent leaves and other debris from blocking the rain flow down.
5. Widely Application
Our ABS tipping bucket rain gauge can measure precipitation, precipitation intensity, precipitation time, and other parameters for relevant departments such as imeteorological stations, hydrological stations, agriculture and forestry, national defense, and field observation stations. It can provide original data for flood control, water supply dispatching, and water regime management of power stations and reservoirs.
Product Dimensions
Product Specification
ABS rain gauge parameters
Inner diameter: Φ200mm/8 inch
Resolution: 0.2mm
The acute angle of cutting edge: 40°～45°
Operating Temperature: 0～50℃
Working humidity: <95%(40℃)
Measuring range: 0mm～4mm/min
Accuracy: ≤±7%
Power supply: 10V～30V DC
Output signal: RS485/Pulse
Mounting holes: Three mountings
