High-frequency radar level meter is the radar level meter adopts up to 26GHz/24GHz transmitting frequency, which increases the measuring distance and accuracy, the antenna is further optimized, and the processor is also upgraded accordingly, which makes it possible to analyze the signals at a higher rate.The combination of these factors makes the performance of the meter has been greatly improved, can overcome more complex measurement conditions, to obtain more accurate measurement data.
Measuring principle
High-frequency radar level meter work, the radar antenna transmits narrow microwave pulses, transmitted by the antenna, microwave contact with the surface of the measured medium will be reflected, the radar antenna receives the microwave signals and transmit them to the electronic part of the electronic part of the automatic analysis of the signals will be converted into level signals, due to the electromagnetic wave propagation speed is very fast, this process is almost instantaneous.
Features
Non-contact radar, no abrasion, no pollution
Small antenna size, easy to install
Shorter wavelength, better reflection on inclined solid surfaces
Measurement blind spot is smaller, for small tank measurement will also achieve good results
Small beam angle, energy concentration, enhanced return ability at the same time, but also conducive to avoiding interferences
Almost unaffected by corrosion, foam
Almost unaffected by water vapor, temperature and pressure changes in the atmosphere
Severe dusty environments do not affect electromagnetic wave operation
High signal-to-noise ratio for better performance even under fluctuating conditions High frequency, optimal for measurement of solids and mediums with low dielectric constants
