PS19 D- Differental OEM pressure sensor

PS19 D- Differental OEM pressure sensor

Send Inquiry
Products Description

 

Feature

● MEMS technology

● Imported Piezoresistive silicon chip employed

● Sensor diameter:19mm

● 316L stainless steel

● CE standerd

Applications

● Industrial process control

Differential pressure measure   

● Pressure calibrator  


Description

Based on piezoresistive silicon technology, PS19D is manufactured from imported piezoresistive silicon dies. The measured pressure is transmitted to the piezoresistive silicon sensing element through 316L isolated diaphragm and internal medium, thus to realize the precise transformation of electrical signal from pressure. This isolation enables the sensor to measure the pressures of corrosive fluids as well as electro conductive liquids.

 

This sensor is tested by computer automatically, and is compensated by laser trimming for zero and

sensitivity. Its profile and assembly size have good interchangeability with some Europe general products.
PS19D is widely used for differential pressure measurement in many industrial process control areas with perfect long term stability.

 

 

 

 

Speifications

Pressure medium

gas liquid compatible to stainless steel

Pressure ranges

35kPa, 70kPa, 100kPa, 250kPa, 400kPa, 600kPa, 1MPa, 1.6MPa, 2.5MPa

Pressure type

Differential 

Overload pressure

Range

Positive Over pressure

Negative Over pressure

35kPa

70kPa

35kPa

70kPa

150kPa

70kPa

100kPa

200kPa

100kPa

250kPa

500kPa

250kPa

400kPa

800kPa

400kPa

600kPa

1200kPa

600kPa

1MPa

2MPa

1MPa

1.6MPa

3.2MPa

1MPa

2.5MPa

5MPa

1MPa

Output signal

Zero Output    2mV

100mV (typical)   I2C

Accuracy

0.25%FS (standard)

Zero offset

≤±3mV

Long term stability

<0.3%FS/year

Excitation

1.5mA (typical) |5VDC | 10VDC

Compensated Temp.

0°c ~60°c

Operating Temp.

-40~+125°c

Storage Temp.

-40~+125°c

Zero Temp. Coefficient

0.02%F.S./ °c (>= 100kpa) | 0.03%F.S. /°c (<100kpa)

Span Temp. Coefficient

0.02%F.S./ °c (>= 100kpa) | 0.03%F.S. /°c (<100kpa)

Bridge Resistance

Min.

Max.

Unit

2600

5500

ohm

Vibration

20g (20— 5000HZ)

Response time

≤1ms

Electrical connection

 4-wire(typical )  5-wire

Material of membrane

316L

Material of housing

316L  

O-ring

NBR, Viton

Filled oil

silicon oil (Typical ), or olive oil for sanitary application

Wire

39×φ0.015, Silicon shielded, 200bearing

Net weight

36g

 

 

 

 

Product Features

 

 

Product Specification

 

 

Product Dimensions

 

Product Features

 

 

Product Dimensions
Product Specification