Radar Level Sensors

  • 80 GHz Non-Contact Radar

    Frequency modulated continuous wave, strong adaptability

    High measurement accuracy

    Simple debugging

    Simple setting

    read more
  • Radar water level sensors

    ●Sensors for non-contact water level measurement, suitable for measurements in even severe applications.

    ●IP68 protection.

    ●It does not require maintenance as it measures without contact with the liquid.

    ●High stability even in situations of large and sudden thermal gradients.

    read more
  • Smart Explosion-Proof Guided Wave Radar Level Gauge level meter

     Small antenna size, easy to install; non-contact radar, no wear, no pollution.

     Almost unaffected by corrosion and foam; almost unaffected by water vapor, temperature and pressure changes in the atmosphere.

     Severe dust environment has little effect on the operation of high-frequency level meters.

     Shorter wavelength, better reflection on inclined solid surfaces.

    read more
  • Water Conservancy River RS485 Radar Level Sensor

    High measurement accuracy, up to millimeter level;

     Not affected by the environment, can penetrate vacuum, haze, rain and snow, etc.;

     Not affected by the measured medium, can measure any liquid;

     No need to build a water level well, simple installation and maintenance;

    read more
  • Vacorda High Frequency 12VDC Guided Wave Radar Type Level Transmitter
     No maintenance required and strong operability
    Easy maintenance and simple operation
     Wide application range, can measure almost all media
    Continuous and accurate measurement
    read more
  • Particularly Low Dielectric Constant Liquid -40℃ Radar Type Level Sensor

    Good stability, the long-term stability of full scale and zero position can reach 0.1%FS/year. In the compensation temperature range of 0 ~ 70 ℃, the temperature drift is less than 0.1%FS, and less than 0.3%FS in the entire allowable operating temperature range.

     With reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are connected in reverse during installation. In the event of an abnormality, the transmitter will automatically limit to less than 35MA.

     Solid-state structure, no moving parts, high reliability, and long service life.

    read more